PRODUCTS
keyword: Product Category:

Product Name:Economy Type Wire Rod Shot Blasting Machine
Product Num:2
Product Detail:

The Wire Rod Shot Blasting Machine is suitable for cleaning oxide skin on the surface of wire rods and bars, which could replace pickling, alkaline wash etc. It has many advantages,such as environmental protection, high efficiency, stable quality, low labor cost, convenient maintenance, low investment and so on. The shot blasting machine could be custom made as per customers’requirements and work piece’s dimension.

 

Mainly Part:

1. Shot blasting cleaning room system. ( 4 set of shot blasting turbines and shot blasting chamber)

2. Working piece conveying system. (Conveying roller table with motor)

3. Abrasive recovery system. (Longitudinal screw conveyor, Bucket elevator, Separator, Storage bin, Shot-controlling valve)

4. Dust remover system. (Cartridge filter, Pulse blow-back device, Fan, Air duct,Dust removalchamber of steel structure)

5. Electric control system. (PCL + Touch Screen )

 

Characteristics:

1). The arrangement of the blasting room and shot blasting turbines both come from computer 3D dynamic simulation, make sure the cleaning is full and thorough.

2). Adopts factory own designed shot blast turbines which have large power, high efficiency and speed, so as to obtain satisfactory cleaning quality.

3). Adopts world advanced filter cartridge type dust remover which has high efficiency, low running resistance, small volume, light weight, easy for repair and replacement. The primary separator of this dust remover is fixed on the shot blast cleaning room, to save covering area of the machine.

4). Adopts world advanced separator which is accompanied with winnowing for separating good steel shots from the oxide skin, dust, cracked shots, large debris.

5). All sides inside the blasting room are equipped with wear-resistant plates (lifetime more than 1500hrs). The front and behind of the blasting room are tightly sealed by multilayer rubber curtain to prevent steel shot fling out the room.

 

Wire Rod Shot Blasting Machine's Technology parameters:

 

Items

Parameters

 

Remark

Work piece dimension 

Φ5.5~40mm

 

Work piece Length

6m~9m

 

Processing speed 

(Work efficiency)

Φ5~10mm   60~80m/min

Φ8~22mm   50~60m/min

Φ16~30mm  30~40m/min

Φ20~40mm  25~30m/min

The productivity depends on work piece's 

material and cleaning requirement.

Derusting standard

Sa2.5(GB8923-88)

 

Roughness 

15~50µm(GB1030-83)

 

Shot Blasting Turbines 

Model : PD-22Z type 

Quantity : 4 set

Power : 88KW

Shot blasting Capacity:

280kg/min×4sets=1120kg/min

Bearing pedestal, belt pulley

Dust Remover 

Air volume ≥3500m3/h

Fan model 4-72№4A

Fan power 5.5KW

Pulse blow-back device, filter cartridge dust collector

Work piece transporting height

1100mm

No pit 

Installed capacity

97.2Kw

Do not include pay-off and coiling device, 

automatic loading and unloading device.

 

 Wire Rod Shot Blasting Machine's Basic configuration:

 

Items

   Qty

 Parameter

Remark

Shot blasting turbines

  4 set

PD-22Z model

4*22=88KW

Screw conveyor

  1 set

LS200*1400  1200kg/min

1.5kw*4P

Bucket elevator 

  1 set

TD250*3700  1200kg/min

2.2kw*4P

Filter cartridge type dust remover

  1 set

LM40-9Type   Q=4000m3/h

5.5kw*2P

Liner plate of blast chamber

 1 set

KmTBCr27  W=1000kg

      Working life≧8000 hours



ADD:Xin’an Industrial Park, Wuxi New District, Jiangsu
ZIP:214135
TEL:+86-13771469408
FAX:+86-510-85607717
E-MAIIL:sales@wxluhuan.com
     wxlhjx@hotmail.com
SITE:www.wxluhuan.com